Evergreen, CO Whole-Home Rewiring Costs (2026)

Estimated Read Time: 12 minutes

If you’re researching the cost to rewire a house, you’re likely facing old or unsafe wiring and rising electrical needs. This guide gives a clear 2026 price breakdown, the factors that change your total, and ways to save without risking safety or code compliance. We’ll show typical Denver-area ranges, explain line-item pricing, and share when a panel upgrade or added circuits make sense. By the end, you’ll know what to expect, how to budget, and how to pick the right electrician.

What “rewiring a house” really includes in 2026

Whole-home rewiring replaces unsafe or undersized wiring with modern copper conductors and devices, brings circuits up to code, and prepares your home for today’s loads. In practical terms, a professional project usually includes:

Circuit mapping, safety evaluation, and load calculations.
Replacing branch-circuit wiring and adding grounded outlets.
Updating device boxes, GFCI and AFCI protection, and bonding where needed.
Repairing drywall in access paths and cleaning up dust.
Pulling permits, coordinating utility disconnects when required, and passing final inspection.

Fix-it 24/7 carefully plans each phase to minimize disruption to your routine and handles all permitting and inspection requirements to ensure your upgrade meets local codes and industry best practices.

2026 national and Denver-area price ranges

Every home is different, but these are realistic 2026 ranges we see across the Front Range for a complete rewire performed by a licensed, insured contractor with permits and inspection.

Small homes or condos up to 1,000 sq ft: $6,000 to $11,000
1,200 to 1,800 sq ft bungalows and ranches: $10,000 to $18,000
2,000 to 3,000 sq ft two-story homes: $16,000 to $30,000
3,000+ sq ft or complex layouts: $28,000 to $50,000+

Useful rule of thumb

Per square foot: $4 to $10 depending on access, finishes, and code upgrades.
Per device point (outlet, switch, or light location): $125 to $275, including patching.

Why the wide range? Homes in Denver, Aurora, and Boulder vary from 1920s knob-and-tube to 1990s NM cable. Plaster walls, finished basements, and specialty lighting add labor and patching time compared with open framing or easy attic access.

Line-item cost breakdown

Understanding the parts and labor behind the invoice helps you compare quotes apples to apples.

Labor: 45% to 60% of the total
- Licensed electricians and apprentices typically bill $95 to $150 per hour in the Denver metro, reflecting insurance, training, and code compliance.
Materials: 20% to 30%
- Copper wire, boxes, devices, staples, connectors, GFCI/AFCI protection, and hardware.
Panel upgrade or service work: $2,000 to $4,500 (if needed)
- Required when the existing panel is undersized, corroded, recalled, or lacks spaces for new circuits.
Dedicated circuits: $300 to $900 each
- For induction ranges, microwaves, disposals, dishwashers, garage equipment, EV chargers, and workshop tools.
GFCI/AFCI protection: $45 to $120 per breaker plus labor
- Kitchens, baths, laundry, garages, and exterior require GFCI. Most living areas require AFCI per modern codes.
Permit and inspection fees: $200 to $800
- Varies by jurisdiction across Denver, Lakewood, Thornton, and Boulder.
Drywall and paint touch-ups: $500 to $3,000
- Plaster and lath restoration costs more than simple drywall patches.

What drives your price up or down

Several factors change the scope and therefore the cost to rewire a house.

Access and construction type
- Plaster and lath, stone foundations, tight crawlspaces, and finished basements increase labor.
- Open attics and basements reduce fishing time and patching.
Age and condition of existing wiring
- Knob-and-tube, cloth-insulated, and aluminum branch circuits often require more demo and safety steps.
Panel capacity and service size
- Many older panels cannot safely support today’s loads. Upgrades add cost but protect the investment.
Appliance and lifestyle loads
- Home offices, induction cooking, hot tubs, EV chargers, and shop tools need dedicated circuits.
Finish level
- High-end fixtures, designer devices, and outlet relocations add material and labor.
City requirements
- Most Front Range jurisdictions require electrical permits and final inspections. We handle both so your project passes cleanly.

Typical rewiring scenarios and budgets

Use these common Denver-area scenarios to estimate your project.

1920s to 1940s bungalow, 1,400 sq ft, plaster walls
- Scope: Replace knob-and-tube, add grounded outlets, GFCI in kitchen and bath, AFCI in living areas, new lighting runs, and a few dedicated circuits.
- Budget: $12,000 to $20,000. Add $2,500 to $4,500 if the panel is upgraded.
1960s ranch, 1,800 sq ft, partial finished basement
- Scope: Replace brittle cloth NM cable, add laundry and microwave circuits, correct shared neutrals, update bathroom fan and lighting.
- Budget: $11,000 to $18,000.
1990s two-story, 2,400 sq ft, remodel-ready
- Scope: Rework circuits during kitchen update, add island circuit, dedicated dishwasher and disposal, garage workshop circuit, and LED lighting.
- Budget: $16,000 to $26,000.

How long does a whole-home rewire take?

Planning and permits: 2 to 7 business days, depending on jurisdiction.
On-site work: 3 to 10 working days for most homes.
Patching and paint: 1 to 5 days, based on finish level.

We stage work to keep essential rooms powered when possible and clearly communicate daily progress so you can plan life around the project.

Code and safety essentials homeowners should know

Two code protections matter in every rewire because they reduce fire and shock risks:

GFCI protection is required in kitchens, bathrooms, laundry, garages, and outdoor areas to reduce shock risk.
AFCI protection is required for most living areas to reduce arc-fault fire risk.

In addition, modern rewires add equipment grounding conductors, correct box fill, ensure proper bonding, and size conductors to the expected load. Every job we complete meets or exceeds local electrical codes and industry best practices, and we maintain comprehensive insurance coverage.

Do you always need a panel upgrade?

Not always. If your panel is modern, has room for new breakers, and the service conductors are properly sized, you may not need an upgrade. You likely do if you see any of the following:

Frequent tripping, scorching, rust, or moisture in the panel.
No space for additional breakers.
A recalled or obsolete brand.
Undersized service for planned loads like EV charging or an induction range.

When needed, we integrate Electrical Panel Upgrades and Wiring into the project so new circuits and protections are installed cleanly and inspected together.

Where rewiring intersects with other projects

A rewire is the perfect time to bundle improvements while walls are open.

Circuit Installation and Expansion for kitchens, laundry, and garages.
Outlet and Switch Wiring upgrades including GFCI receptacles and USB outlets.
Lighting System Wiring for recessed, pendant, chandeliers, and outdoor lighting.
Smart Home Wiring Integration for cameras, access points, and hubs.
Hot Tub and Spa Wiring or EV Charger Installation Wiring with dedicated protection.
Kitchen and Bathroom Electrical Wiring during remodels.

Bundling saves on labor mobilization and patching because technicians can fish multiple runs per access point.

How to compare quotes the right way

When you gather estimates, ask each contractor to include the same details so comparison is fair and simple.

Scope clarity
- Number of circuits, device count, and whether dedicated circuits are included.
Protections and parts
- Specify GFCI/AFCI locations, device grade, and panel brand.
Finish and patching
- Confirm who patches drywall, texture matching, and paint.
Permits and inspections
- Rewires must be permitted and inspected. Confirm the contractor handles both and meets local code.
Warranty and guarantees
- Get workmanship guarantees in writing and confirm insurance coverage.
Scheduling and disruptions
- Ask how they will stage power, protect floors, and clean up daily.

Fix-it 24/7 provides transparent, flat-rate pricing with no hidden fees, handles all permits and inspections, and backs your project with our Quality Workmanship Guarantee.

Ways to save without cutting corners

You can reduce the cost to rewire a house without risking safety by planning smart.

Combine projects
- Add circuits for future appliances or a home office now to avoid a second mobilization later.
Open access points ahead of time
- Clearing furniture and approving access routes speeds the job.
Choose standard finishes
- Designer devices look great but can triple material cost across a whole home.
Schedule during normal hours
- Emergency work costs more. Plan your rewire before a failure forces after-hours rates.
Leverage financing
- Ask about payment options so you can complete safety work now and spread costs out.

Signs your home may need rewiring now

If you see any of these, schedule an inspection soon.

Frequent breaker trips or fuses blowing.
Warm or buzzing outlets and switches.
Two-prong outlets with no grounding.
Lights dim when appliances run.
Original cloth, aluminum, or knob-and-tube wiring.

Fix-it 24/7 offers 24/7 emergency service if you lose power to critical areas, and we can fast-track unsafe conditions to keep your family protected.

Denver-area local insight

Homes across Denver, Arvada, and Boulder often blend historic charm with older electrical systems. Bungalows near City Park and Highlands commonly have plaster walls and legacy wiring. Many 1970s homes in Lakewood or Thornton have limited panel spaces but modern lifestyle loads. Our team knows the housing stock and plans routes that minimize plaster cuts while adding the dedicated circuits today’s homes need.

What Homeowners Are Saying

"Did a full on kitchen remodel. New Main Distribution panel with several new dedicated circuits to kitchen for induction range, GFCI Safety outlets and power to disposal and dishwasher. Alex handled whole project knew what he was doing, efficient, patient and taught me a great deal about electrical systems. He is an Electrical Ninja. Recommend him for any electrical upgrades." –Alex, Electrical Upgrade in Denver Metro

"My breaker box quit supplying almost all the power to my house late last night and this great business had a wonderful electrician, I believe his name was Cody, out to my house the next morning. He was a very nice guy who had 19 years of experience! A new main breaker box was installed by him and a small team shortly after running diagnostics. I was extremely stressed out initially and was very appreciative of the fast response and also grateful to Cody for putting my worries at ease and explaining what the problem was. Great job team!!!" –Cody, Panel Replacement in Aurora

"Greg did a great job fixing wiring issues. Explained what he was going to do. Showed pictures of completed work." –Greg, Wiring Repair in Boulder

"Isaac and Cole were exceptional, genuine and hard working guys. They did not stop working only for a lunch break. They were funny, kind, respectful and considerate. It was awesome to watch how tedious electrical work really is and I grew an appreciation for their jobs. ... I just moved into this home and my main panel literally would shut off my power if you touched it or looked at it wrong. Everyone took great care of me ... Great company and great people. Thanks for taking care of your employees and customers. It shows and it made me feel like I had friends around me, a connection and that's huge to me and my experiences in life. Thank you all!" –Isaac and Cole, Panel Safety Fix in Lakewood

Frequently Asked Questions

How much does it cost to rewire a house in 2026?

Most Denver-area homes fall between $10,000 and $30,000 depending on size, access, finish level, and code upgrades. Small condos can be $6,000 to $11,000. Large or complex homes can exceed $50,000.

Do I need a permit to rewire my house?

Yes. Whole-home rewiring requires permits and a final inspection in Front Range jurisdictions. Fix-it 24/7 handles permitting and inspections for you.

Will I need to upgrade my electrical panel?

Only if the panel is unsafe, obsolete, or lacks capacity for added circuits. Many older panels need upgrades. Expect $2,000 to $4,500 when required.

How long will my power be out during a rewire?

We stage work to keep essential areas powered when possible. Expect several hours of full outage during panel work and targeted outages by room as circuits are replaced.

Can I stay in my home during the project?

Usually yes. We plan daily cutovers, protect floors, and clean up. Some homeowners choose to be out during heavy demo or patching days for comfort.

Recap: Plan your 2026 rewire with confidence

The cost to rewire a house depends on access, code upgrades, and the circuits you need for modern living. For Denver, Aurora, and Boulder homes, realistic budgets run $10,000 to $30,000 for most projects, with permits and inspections included. Choosing a licensed, insured contractor who handles permitting and guarantees workmanship protects your investment and safety.

Talk to a Licensed Electrician Today

Ready for a precise, written quote for your home? Call Fix-it 24/7 at (720) 577-4266 or schedule at https://fixmyhome.com/ for flat-rate, code-compliant rewiring. We handle permits, minimize disruption, and stand behind our work with a 100% Satisfaction Guarantee. Serving Denver, Aurora, Lakewood, Thornton, Arvada, Boulder, Westminster, Centennial, Lafayette, and Longmont.

About Fix-it 24/7 Plumbing, Heating, Air & Electric

Fix-it 24/7 is Denver’s trusted home services team for electrical, HVAC, and plumbing. We are licensed and insured, offer honest flat-rate pricing, and back our work with a 100% Satisfaction Guarantee. We handle permits and inspections, arrive 24/7 for emergencies, and protect your home with shoe covers and clean work areas. Recognized with an A+ rating from the Better Business Bureau, our background-checked technicians deliver code-compliant work the right way, the first time.